Teleflex Clamp & Shim Kit 3300 STR-CA28020P

The Teleflex CA28020P Clamp & Shim Kit is a control-cable connection hardware kit used with compatible 3300 / 33C-style marine throttle and shift cables. It provides the clamp and shim hardware needed to secure the control cable at the engine, control, or connection bracket location where this kit is specified. This is a small but important service part for restoring a secure cable mount and proper cable alignment.

Key Features

• Clamp and shim kit for compatible 3300-style control cables
• Part number: CA28020P
• SKU reference: STR-CA28020P
• Used for throttle and shift cable connection points
• Commonly associated with 3300 / 33C-style universal control cables
• Hole spacing reference: 7/8 in. on center
• Width reference: 1/2 in.
• Center reference: 3/8 in.
• Helps secure the cable casing so the inner cable can move correctly
• Useful for control cable installation, replacement, or service work

Product Compatibility

This kit is intended for compatible 3300 / 33C-style marine control cables used in throttle and shift control systems. It should be matched to the existing cable type, control head, engine-side connection bracket, and cable mounting geometry before ordering.

Fitment Notice

Confirm the existing cable series, clamp style, shim requirement, hole spacing, and bracket arrangement before installation. Control cable hardware can look similar, but small differences in clamp position or cable support can affect shift and throttle travel.

When This Part Needs Replacement

Replace this kit if the original clamp or shim is missing, corroded, bent, cracked, worn, stripped, or no longer holds the control cable securely. A loose or damaged cable clamp can cause sloppy control feel, incomplete shift travel, throttle travel issues, or poor cable alignment.

Installation Notes

Install the clamp and shim in the same cable-support location specified by the control or engine-side bracket. Confirm the cable casing is held firmly without crushing it, and check that the inner cable moves smoothly through the full throttle or shift range after installation. Final adjustment should be made according to the control cable and engine setup.

Alternate/Superseded Part Numbers

• CA28020P
• STR-CA28020P
• TEL CA28020P
• SP-CA28020P
• Clamp & Shim Kit 3300
• 3300 Cable Clamp and Shim Kit

Parts Desk Insight

This is a small hardware kit, but it directly affects control-cable stability. If the clamp does not hold the cable casing firmly, the cable can move instead of transferring full travel to the throttle or shift linkage.

Shipping: Ships same or next day for fast Canada wide shipping.