Buck Algonquin Bronze Pipe/Hose Adapter 1″ Straight

Buck Algonquin Bronze Pipe/Hose Adapter 1″ Straight

A clean, reliable connection between a 1″ NPT pipe-threaded seacock or ball valve and a 1″ hose. This Buck Algonquin straight adapter is cast from naval bronze the correct material for raw water and below-waterline plumbing and is designed to pair directly with Buck Algonquin bronze through-hulls and ball valves for a complete, matched installation.

The 1″ size is one of the most versatile in marine plumbing, covering cockpit drains, bilge pump discharge, raw water intakes, and smaller exhaust outlets. At this price its also a practical spare to keep on board.

Specifications

• Pipe thread (valve side): 1″ NPT
• Hose barb (hose side): 1″
• Angle: Straight
• Material: Naval bronze
• Application: Pipe-to-hose connection on marine seacocks and ball valves
• Part Number: BUC-HN-100

Best For

• Connecting a 1″ ball valve or seacock directly to a 1″ hose run
• Cockpit and deck drain plumbing
• Bilge pump discharge outlets
• Raw water intake on smaller inboard and auxiliary engines
• Replacement of corroded or leaking adapters in existing 1″ installations
• Keeping a spare on board for emergency repairs

Complete Your Installation

• Ball Valve 1″ Bronze matching seacock this adapter threads onto
• Through-Hull 1″ Bronze matching through-hull for this valve size
• Pipe/Hose Adapter 3/4″ x 1″ Bronze reducer adapter stepping down from 1″ hose to 3/4″ valve
• Pipe/Hose Adapter 3/4″ Bronze Straight smaller straight adapter
• Pipe/Hose Adapter 2-1/2″ Bronze Straight larger straight adapter for high-flow applications

Parts Desk Insights

Best use case: The 1″ straight adapter is the natural companion to the 1″ through-hull and 1″ ball valve it completes the assembly by connecting the valve outlet to the hose run. Its the most commonly requested adapter for mid-size production boats where 1″ plumbing covers cockpit drains, bilge discharge, and smaller raw water intakes. At this price point its worth suggesting as a spare, particularly for customers heading offshore. If the customers hose needs to exit at a right angle, there is no 1″ elbow in this family check whether a custom solution or a different size fits their system. Always confirm hose ID and valve thread size before finalizing the recommendation. Bronze is the correct material for below-waterline and raw water fittings.