Dometic SeaStar Safe-T QC Steering Kit 9′ STR-SS13709

Dometic SeaStar SS13709 is a 9-foot Safe-T QC mechanical rotary steering kit for single-station marine steering systems. Dometic identifies it as a traditional mechanical steering kit intended for sterndrives, inboards, and other power-assisted applications where No FeedBack steering is not required. The kit uses the Safe-T Quick Connect helm-to-cable connection for faster installation and quick-response steering.

Key Features

• Genuine Dometic SeaStar SS13709 steering kit.
• 9′ steering cable length.
• Single-station steering kit.
• Accepts steering wheels up to 16″ diameter with a standard 3/4″ round tapered steering shaft.
• 3 turns lock-to-lock for quick steering response.
• Includes helm, 90 bezel, 9′ cable, and hardware.
• Uses stainless steel cable output ends.
• Meets A.B.Y.C. standards and N.M.M.A. certification requirements.

Engine Compatibility

This is not an engine-specific part. SS13709 is a mechanical steering kit selected by boat steering layout, helm type, steering station count, and cable length rather than by engine make or serial number. Dometic positions this kit for sterndrives, inboards, and other power-assisted applications, and notes that it is for single-station use only.

Serial Number Fitment Notice

Match this kit by steering application and cable length rather than by engine serial number. The important checks are whether the boat uses a single-station mechanical steering system, whether 9 feet is the correct cable length, and whether the helm application fits the Safe-T QC system. Dometic also states that Safe-T QC replaces SeaStar Safe-T helms made since 1968 with little or no dash modification.

When This Part Needs Replacement

Replace the steering kit when the helm or cable becomes stiff, rough, loose, or inconsistent, or when the steering system is being renewed as a complete assembly. In practical service terms, complete kits like SS13709 are also a common replacement choice when updating an older Safe-T helm and cable together instead of replacing parts one at a time. This is a service-based inference supported by Dometic’s positioning of the kit as a complete steering package.

Installation Notes

Install SS13709 only after confirming the correct steering-cable length and helm application for the boat. Current Dometic and dealer references show the kit includes SH5094-1P helm, SB27484P 90 bezel, and SSC6209 cable, with a no-tools-required cable connection at the helm for easier installation.

Alternate/Superseded Part Numbers

Current Dometic references show SS13709 as the legacy factory item number and 9130005903 as the current Dometic article number for this same steering kit.

Parts Desk Insight

With steering kits, the most important match is usually cable length and helm style, not just the product family name. Confirming the steering run before ordering is usually the simplest way to avoid installation problems.

Shipping: Ships same or next day for fast Canada wide shipping.