Volvo Penta Bellows Kit 876294

OEM Part Number: 876294
Part Type: U-Joint / Driveshaft Bellows Kit
Application: Sterndrive driveshaft sealing system

Product Description

The Volvo Penta 876294 bellows kit is designed to seal the driveshaft (U-joint) area between the sterndrive and the transom assembly. The bellows protects critical drivetrain components such as the U-joints, gimbal bearing, and driveshaft from water intrusion while allowing the sterndrive to move during steering and trim operations.

Constructed from durable marine-grade neoprene rubber, the bellows features an accordion-style design that maintains flexibility while providing a watertight seal. Properly functioning bellows are essential for preventing water from entering the sterndrive housing and damaging internal drivetrain components.

The 876294 kit replaces earlier Volvo Penta bellows references including 875826, and aftermarket equivalents such as Sierra 18-2744.

Compatible Volvo Penta Engine Types

This bellows kit is used on Volvo Penta sterndrive systems, which are installed with a wide range of gasoline and diesel engines.

Volvo Penta Sterndrive Models

• 200 / 250 / 270 / 270T

• 275 / 275A

• 280 / 280TA / 280PT / 280DP

• 285

• 290 / 290A / 290DP

Volvo Penta Single-Prop Drives (SP)

• SP-A

• SP-A1

• SP-A2

• SP-C

• SP-C1

• SP-E

Volvo Penta Duo-Prop Drives (DP)

• DP-A / DP-A1 / DP-A2

• DP-B / DP-B1

• DP-C / DP-C1

• DP-D / DP-D1

• DP-E

• DP-G

• DPX-A / DPX-R / DPX-S

These drives are commonly paired with Volvo Penta gasoline and diesel marine engines ranging roughly 200500 HP depending on the propulsion configuration.

How to Verify Compatibility Using Your Engine Serial Number

Volvo Penta engines and sterndrives include identification plates listing the engine model, drive model, and serial number.

Typical locations include:

• On the engine block

• On the sterndrive housing

• On the transom shield or mounting bracket

To confirm compatibility:

1. Locate the engine and sterndrive serial numbers on the identification plates.

2. Check the Volvo Penta parts catalog for your specific sterndrive model and serial number range.

3. Confirm that bellows kit 876294 is listed in the sterndrive driveshaft or bellows assembly diagram.

Because sterndrive components vary by drive model and revision, verifying the serial number ensures the correct bellows type and fitment.

Specifications

Key Features

• Genuine OEM replacement for Volvo Penta 876294

• Protects U-joints, gimbal bearing, and driveshaft from water intrusion

• Durable marine-grade neoprene bellows construction

• Flexible accordion design for sterndrive movement

• Compatible with many Volvo Penta SP and DP sterndrives

• OEM-fit component for reliable installation and service

OEM parts ship same or next day for fast Canada wide shipping.