Volvo Penta Rubber Ring 813967

Volvo Penta 813967 is a genuine rubber ring used in selected Volvo Penta sterndrive and flywheel housing sealing applications. Volvo Penta’s official parts shop lists 813967 as a rubber ring, while current replacement-market references consistently describe it as the sealing ring used between the engine and drive clamp-ring area or transom-side sterndrive sealing arrangement. Current dimensional references identify it as an approximately 200 mm outside diameter ring.

Key Features

• Genuine Volvo Penta part number 813967
• Official Volvo Penta description: rubber ring
• Used as a sealing ring in sterndrive / clamp-ring / flywheel housing applications
• Current dimensional reference: outside diameter approx. 200 mm
• Some current references note 2 rings required in certain applications

Engine Compatibility

Current supportable references tie Volvo Penta 813967 to a broad group of classic Aquamatic and later sterndrive applications. Public replacement references commonly list drives including 100, 200, 250, 270, 280, 280 DP, 290, 290 DP, SP-A, SP-C, DP-A, DP-B, DP-C, DP-D, DP-E, DP-G, and DP-H. The safest final match is by exact engine or drive serial number.

Serial Number Fitment Notice

Volvo Penta rubber ring fitment can vary by drive model, flywheel housing arrangement, clamp-ring design, and production break. Confirm part number 813967 against your exact engine or drive serial number before ordering. Volvo Penta specifically directs owners to identify the engine, shield, or drive when selecting genuine parts.

When This Part Needs Replacement

Replace this rubber ring when the original seal is flattened, hardened, cracked, cut, leaking, or disturbed during sterndrive or flywheel housing service. It is also a smart replacement item whenever the related clamp-ring or engine-to-drive sealing area is apart, since reused rubber rings often lose sealing reliability after removal.

Installation Notes

Install only after confirming the exact application by serial number and parts diagram. Inspect the sealing groove, clamp-ring area, and surrounding mating surfaces for corrosion, distortion, or debris before fitting the new ring. Correct placement and full-ring seating matter.

Alternate/Superseded Part Numbers

Current reviewed sources consistently present 813967 as the key Volvo Penta ordering number. Replacement-market references also commonly show aftermarket equivalents such as Orbitrade 19967 and RM8368. The cleanest genuine ordering reference remains Volvo Penta 813967.

Parts Desk Insight

This is one of those sealing parts that can look simple but matters a lot when the engine and drive sealing interface is apart. On older Volvo Penta sterndrive setups, replacing the rubber ring during service is usually the cleaner move than reusing an older seal that has already taken a set. The main key is matching it to the exact housing and clamp-ring arrangement, because the application range is broad and the same style of ring appears across many Volvo Penta drive families.

Shipping: Ships same or next day for fast Canada wide shipping.