Digital Yacht LANLink NMEA 2000 To Ethernet Gateway

LANLink NMEA 2000 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boats NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.*This version ships with an iKonvertNMEA Certified gatewayFeatures:NMEA 2000 to ethernet gateway versionThe NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options)12/24v DC low power operationConnects to router or devices via simple RJ45 Cat 5/6 patch cable connectionWeb user interface for easy setup from the connected device via browserTCP/IP or UDP connection modes support for up to 5 connected devices with TCP/IPBi-DirectionalThe NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPSRS232 port for PC apps tooStatus indicators for power, data in-out, network link, and server statusSet-Up:Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setupConfigure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and portSet up with fixed or dynamic IP addressStatus page for system diagnosticsSpecifications:Power: 10-35V DC (Consumption approx. 50mA at 12V DC)Network Port: Ethernet RJ45 10/100MBIP Mode: Static or DHCPOperating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operationNMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)NMEA 2000 option via iKonvertgatewayOperating temp: -25 to +70 degrees CLED Indicators: Power -Status -Link -Data In -Data OutOptions: RS232 connectivity (non-concurrent with NMEA)Dimensions (W x H): 95mm x 86mm