Replacement Filter (3/Card)

Replacement Filter Element for In-line Fuel Filter is a universal style element for your boat’s in-line filter. Replaces any 1/4″, 5/16″ or 3/8″ filter element.

• In-line style universal filter element replaces any 1/4″, 5/16″ or 3/8″ filter element
• Protects all carbureted engines

1. Remove fuel filter from fuel line
2. Unscrew and remove the filter end marked IN”
3. Remove glass sleeve, magnet & spring
4. Remove spindle by turning counter clockwise
5. Remove the used element and discard
6. Replace O” rings on end caps if required (Replace only if originals are leaking or appear cracked or torn)
7. Place a new element on the spindle and screw back into OUT” end cap. Screw firmly to properly seat element at both ends
8. Replace glass sleeve. Replace spring and then magnet on spindle
9. Screw IN” end cap onto spindle just slightly tighter than finger tightDo Not Over Tighten
10. Replace filter in fuel line
11. Start engine and check for leaks