Buck Algonquin Bronze 90 Pipe/Hose Adapter 2″

Buck Algonquin Bronze 90 Pipe/Hose Adapter 2″

A large-bore 90 elbow adapter for mid-to-large marine plumbing applications. This 2″ fitting connects a 2″ NPT pipe-threaded valve or through-hull to a 2″ hose at a right angle the go-to solution when engine room layout, hull geometry, or nearby structure prevents a straight hose exit.

Cast from naval bronze for long-term corrosion and heat resistance. At 2″, this fitting is most commonly used in wet exhaust systems on mid-size inboard engines and large raw water intake plumbing on cruising and commercial vessels.

Specifications

• Pipe thread (valve/hull side): 2″ NPT
• Hose barb (hose side): 2″
• Angle: 90 elbow
• Material: Naval bronze
• Application: Large-bore right-angle pipe-to-hose transition
• Part Number: BUC-HN-200-E

Best For

• Wet exhaust elbow connections on mid-size inboard diesel and petrol engines
• Large raw water intake plumbing where a 90 turn is required
• Engine room installations with limited straight-run clearance
• Replacement of corroded or failing 2″ exhaust or drain elbows
• Any 2″ plumbing run that must change direction off the valve or through-hull

Related Buck Algonquin Plumbing

• Pipe/Hose Adapter 2-1/2″ Bronze 90 Elbow larger elbow for bigger exhaust systems
• Pipe/Hose Adapter 3/4″ Bronze 90 Elbow smaller elbow adapter
• Pipe/Hose Adapter 3/4″ Bronze Straight straight adapter option
• Through-Hull 1-1/4″ Long Bronze large through-hull option
• Through-Hull 1″ Bronze mid-size through-hull option

Parts Desk Insights

Best use case: The 2″ elbow is the right fit for mid-size inboard engine wet exhaust plumbing it sits between the 3/4″ fittings used for smaller accessories and the 2-1/2″ fittings used on larger diesel installations. Most commonly requested for engine exhaust elbow replacements and raw water intake routing on 3045 ft cruising vessels. Always confirm the pipe thread size on the valve or manifold and the hose ID before ordering 2″ and 2-1/4″ are sometimes confused. If the customer needs a straight exit, there is no straight 2″ adapter in this family check whether the 2-1/2″ elbow or a different size better fits their system. Bronze is the correct material for wet exhaust and raw water applications due to its heat and corrosion resistance.