Dometic SeaStar Ace Steering Wheel With Flush Cap STR-SW59691P

Dometic SeaStar SW59691P is a genuine Ace steering wheel with a black PVC grip rim and flush center pad / cap for marine steering systems. Dometic’s current product page identifies SW59691P as the Ace Steering Wheel, 13.5″, built to attach to marine helms with an ABYC standard 3/4″ tapered steering shaft using anti-vibratory lock nuts.

Key Features

• Genuine Dometic SeaStar SW59691P steering wheel.
• 13.5″ diameter steering wheel.
• Fits helms with standard 3/4″ tapered shafts.
• Black PVC grip rim with flush center pad / cap.
• 3-spoke design for mechanical steering applications.
• Built from UV- and corrosion-resistant materials for marine use.
• Current Dometic logistics data lists parcel weight around 2.66 lb.

Engine Compatibility

This is not an engine-specific part. SW59691P is a marine steering wheel selected by helm shaft type and steering system style, not by engine make or serial number. The strongest supportable fitment is with marine helms using the standard 3/4″ tapered steering shaft used in compatible mechanical steering systems.

Serial Number Fitment Notice

Match this steering wheel by helm shaft type and steering system layout rather than by engine serial number. The key check is whether the helm uses a 3/4″ tapered shaft and whether the wheel size and dish profile suit the boat’s dash and driver position.

When This Part Needs Replacement

Replace the steering wheel when the rim is cracked, the center cap is missing or damaged, the hub fit is worn, or the finish has deteriorated enough to affect grip and safe steering control. In practical service terms, steering wheels are also commonly replaced when updating a dash or renewing an older mechanical steering setup. This is a service-based inference supported by the part’s role as the helm control interface.

Installation Notes

Install SW59691P only on a compatible helm with a standard 3/4″ tapered steering shaft. Current Dometic information specifies attachment using anti-vibratory lock nuts, so the helm hardware and shaft fit should be confirmed before installation.

Alternate/Superseded Part Numbers

Current Dometic product references show SW59691P as the legacy factory item number and 9130005841 as the current Dometic article number for this same steering wheel.

Parts Desk Insight

With steering wheels, the important match is usually the shaft type and wheel size. Confirming the 3/4″ tapered helm shaft first avoids most fitment problems.

Shipping: Ships same or next day for fast Canada wide shipping.