Rule Next Generation Automatic Bilge Pump

Rule Mate Automatic Bilge Pump

The new eco-friendly Rule Mate series of bilge pumps feature a solid state water sensing technology that eliminates the need for separate float switch. All-in-one pump & switch. Pump turns on when water level rises & shuts off when water is removed. The Rule Mate’s sensor has unique “field effect” technology that will only recognize water. If a 100% concentration of oil is detected, the pump will not activate. This is not a zero discharge prevention system. Rule Mates are the most technically advanced bilge pumps available on the market.

Rule Mate Series are available in 500, 800, and 1100 gph. Rule has been building bilge pumps for 30 years. The pumps are preferred by yachtsmen and commercial fishermen all over the world.
Key Features:

• No float switch required
• Antifouling impeller
• Snap-off strainer for easy cleaning
• Pump turns on when water level rises, & shuts off when water is removed
• Includes back flow preventer
• Ignition protected

RM500B

• GPH: 500
• Dimensions: 4.4″ Height x 3.5″ Width (not including discharge) x 2.9″ Depth
• Footprint: 2.5″ x 2.25″ oval
• Voltage: 12 VDC
• Amp Draw: 1.8 Amps @ max flow
• Fuse Size: 4A fuse required (not included)
• Port Size: 3/4″ NPSM | 3/4″ Hose Barb

RM800B

• GPH: 800
• Dimensions: 4.4″ Height x 3.5″ Width (not including discharge) x 2.9″ Depth
• Footprint: 2.5″ x 2.25″ oval
• Voltage: 12 VDC
• Amp Draw: 3.0 Amps @ max flow
• Fuse Size: 5A fuse required (not included)
• Port Size: 1″ NPSM | 3/4″ Hose Barb

RM1000B

• GPH: 1000
• Dimensions: 4.4″ Height x 3.5″ Width (not including discharge) x 2.9″ Depth
• Footprint: 2.5″ x 2.25″ oval
• Voltage: 12 VDC
• Amp Draw: 3.8 Amps @ max flow
• Fuse Size: 7.5A fuse required (not included)
• Port Size: 1″ NPSM | 1″ Hose Barb | 1-1/8″ Hose Barb