New Customer Offer – Don’t Miss Out on Savings

X

Shopping Cart

Free shipping over

Shopping Cart

Volvo Penta 23005191 IPS Drive Oil Filter IPS15 / IPS2 / IPS20 / IPS3 / IPS30

Original price was: $134.00.Current price is: $67.00.
Availability: In Stock
Categories:
Shipping: Free shipping on orders over $40!

Volvo Penta 23005191 IPS Drive Oil Filter

Part Number: 23005191
Brand: Volvo Penta
Official Product Type: IPS Propulsion Drive Oil Filter
System: IPS (Inboard Performance System) Drive Lubrication
Cross Reference: SH66401

Overview

The Volvo Penta 23005191 is a genuine OEM oil filter for the IPS propulsion drive lubrication system not the engine crankcase. It is the specified filter for IPS15, IPS2, IPS20, IPS3, and IPS30 drive units, and features an updated filtration design documented in IPS2-A applications. This filter removes contaminants and metal particles from the drive oil circuit, protecting critical IPS drivetrain components between service intervals.

Compatible Applications

  • Volvo Penta IPS15-A
  • Volvo Penta IPS15-B
  • Volvo Penta IPS15-C
  • Volvo Penta IPS2-A (updated filter design)
  • Volvo Penta IPS2-B
  • Volvo Penta IPS2-C
  • Volvo Penta IPS20-D
  • Volvo Penta IPS20-E
  • Volvo Penta IPS3-A
  • Volvo Penta IPS3-C
  • Volvo Penta IPS30-D
  • Volvo Penta IPS30-E

Always confirm the exact IPS drive model and serial number before ordering.

IPS Filter Selection Guide

Volvo Penta uses different oil filters across the IPS range. Ordering the wrong filter is a common mistake use this guide to confirm the correct part:

  • IPS1: 22057107 Volvo Penta IPS1 Oil Filter
  • IPS10: 22863663 Volvo Penta IPS10 Oil Filter
  • IPS15 / IPS2 / IPS20 / IPS3 / IPS30: 23005191 (this part)

Service Interval

Replace the IPS drive oil filter at every scheduled IPS drive service interval and whenever the IPS gear oil is changed. Replace sooner if the drive oil shows contamination, discoloration, or abnormal debris during inspection.

Installation Notes

On IPS2-A assemblies, this filter is shown in the propulsion-unit lubrication system diagram alongside the oil strainer, dipstick, covers, O-rings, and related housing components. Before installation: clean the filter mounting surface, lubricate the new seal with clean oil, and check for leakage after returning the drive to service.

Parts Desk Insights

Best use case: Scheduled IPS drive oil service on IPS15, IPS2, IPS20, IPS3, or IPS30 units this is a maintenance item that should be replaced every time the drive oil is changed. Common issue: Customers confuse this with an engine crankcase oil filter. The 23005191 is an IPS propulsion drive filter only. The second most common mistake is ordering without confirming the IPS model IPS1 and IPS10 use different filters entirely. Always verify the IPS drive model before purchasing.

Add a Review

Your email address will not be published. Required fields are marked *

Related Products