Volvo Penta Engine Locating Pin 950542

Volvo Penta 950542 is a genuine OEM pin used in a wide range of Volvo Penta engine assemblies. Current parts references consistently list it as an active Volvo Penta pin, and the strongest schematic evidence shows it being used as a locating or alignment pin in engine-side assemblies such as camshaft and bearing-housing layouts, as well as accessory bracket and belt-tensioner related assemblies.

Key Features

• Genuine Volvo Penta OEM part number 950542.
• Active replacement for earlier Volvo Penta part number 191014.
• Used in engine schematics as a pin in camshaft and bearing-housing related assemblies.
• Also appears in accessory-drive layouts near bracket, idler pulley, and belt tensioner components.
• Dealer listing weight is approximately 0.003 kg.

Engine Compatibility

The strongest supportable fitment for 950542 is by assembly rather than by a single narrow engine family. Current Volvo Penta parts references show it in older engine layouts such as MB10A and in larger diesel engine schematics including TAD1240GE, as well as in camshaft-bearing housing and accessory-drive assemblies tied to modern Volvo engine platforms. Because this pin appears across multiple engine families and component groups, the safest fitment path is to match it to the exact engine schematic and serial-number-based application before ordering.

Serial Number Fitment Notice

Match Volvo Penta part number 950542 to your engine serial number and the correct Volvo Penta parts diagram before ordering. Small locating pins like this can appear in several nearby assemblies, and the same part number may be used in more than one engine family or housing arrangement. This serial-based fitment guidance is supported by its appearance across multiple distinct engine schematics.

When This Part Needs Replacement

This pin should be replaced when it shows corrosion, bending, looseness, damage during teardown, or poor fit in its intended bore or locating point. It is also worth replacing anytime the related housing, bracket, or assembly is already apart and the original pin shows wear or deformation. This service guidance is an inference based on the part’s repeated use as a small locating or assembly pin in multiple Volvo Penta engine schematics.

Installation Notes

Confirm the exact application in the correct Volvo Penta schematic before installation, and compare the removed pin carefully to the replacement part. Inspect the mating bore or housing for wear, burrs, or corrosion before reassembly. With small locating pins, exact application and fit matter more than a quick visual match, especially when several nearby pins may look similar in size. This installation guidance is grounded in the part’s repeated use in multiple engine and accessory assemblies.

Alternate/Superseded Part Numbers

Current Volvo Penta parts references show 950542 as the active OEM number, and Marine Parts Express specifically notes that earlier part number 191014 has been replaced by 950542.

Parts Desk Insight

With small engine pins like this, the easy mistake is assuming any similar dowel or locating pin will work. On Volvo Penta engines, checking the exact schematic location first usually saves time, because the same pin number can show up in very different assemblies across multiple engine families.

Shipping: Ships same or next day for fast Canada wide shipping.