Volvo Penta Exhaust Hose 3584167 D4 DPH / DPR / DPI

Part Information

• Part Number: 3584167
• Brand: Volvo Penta
• Official Product Type: Exhaust Hose
• System: Exhaust / Cooling-Water Pipe Assembly
• Engine Family: D4 Diesel
• Drive Compatibility: DPH, DPR, DPI
• Superseded By: 23666719 (current Volvo Penta replacement number confirm by application before ordering)
• Related D6 Version: 3584168 D6 DPH / DPR Exhaust Hose

Compatible Applications

• Volvo Penta D4-210A-A / B
• Volvo Penta D4-225A-B / C / D / E / F
• Volvo Penta D4-230A-G
• Volvo Penta D4-260A-A / B / C / D / E / F
• Volvo Penta D4-270A-G
• Volvo Penta D4-300A-A / C / D / E
• Additional D4 installations using DPH, DPR, or DPI drive assemblies

Always confirm against your engine model and serial number. Volvo Penta fitment can vary by production break and drive configuration.

Serial Number Fitment Notice

The key distinction in this part family is engine-specific: 3584167 is the D4 exhaust hose; 3584168 is the D6 version. Both hoses occupy the same general location in the DPH / DPR exhaust assembly but are not interchangeable. Always verify your exact engine model and serial number against the Volvo Penta parts diagram before ordering.

What This Part Does

This hose connects the exhaust pipe and cooling-water passage in the D4 exhaust-pipe assembly on DPH, DPR, and DPI drive installations. It carries exhaust gas and cooling water away from the engine, and its integrity is critical to keeping exhaust and water routed correctly within the drive system.

When to Replace

Inspect and replace this hose if it shows cracking, hardening, softening, swelling, heat discolouration, or any evidence of exhaust or cooling-water leakage. It should also be inspected any time the surrounding exhaust pipe or drive-unit plumbing is opened for service.

Installation Notes

While the hose is removed, inspect the associated exhaust pipe (Volvo Penta 40005584), hose clamps, and the nearby O-ring 969415. Confirm the replacement hose is fully seated and that the correct clamps for the specific drive configuration are used before reassembly.

Related Parts Commonly Serviced Together

• Volvo Penta Exhaust Hose 3584168 D6 DPH / DPR OEM D6-specific version of this hose; not interchangeable with 3584167
• Volvo Penta O-Ring 969415 adjacent O-ring in the exhaust-pipe assembly; replace during the same service event

Parts Desk Insights

Best use case: Scheduled exhaust-system service or anytime the D4 exhaust pipe assembly is opened on a DPH, DPR, or DPI drive. Since access requires partial disassembly of the drive-unit exhaust plumbing, replacing the hose and the nearby O-ring 969415 at the same time is the most cost-effective approach.

Common issue: The most frequent mix-up is ordering the D6 hose (3584168) for a D4 installation. The part numbers differ by only one digit and the hoses look similar, but they are engine-specific. Double-checking the engine model not just the drive type before ordering prevents a return.