Volvo Penta Gasket 23557470

Volvo Penta 23557470 is a genuine OEM gasket used in Volvo Penta turbo and air-filter installation component assemblies. Current catalog trails identify it as a gasket tied to the “Turbo and Air Filter with Installation Components” diagram, and broader cross-reference listings commonly associate it with turbo connection or exhaust elbow turbo sealing applications on older Volvo Penta diesel families.

Key Features

• Genuine Volvo Penta OEM gasket, part number 23557470.
• Appears in Volvo Penta “Turbo and Air Filter with Installation Components” diagram references.
• Commonly referenced as a turbo connection or turbo/exhaust sealing gasket.
• One current distributor listing shows an approximate weight of 0.17 lb (0.077 kg).
• Related reference numbers shown in current aftermarket cross-reference sources include 3582676, 859111, and 3581570.

Engine Compatibility

Current cross-reference sources commonly associate Volvo Penta 23557470 with a wide range of older Volvo Penta diesel engine families, including AD31, AD41, AQAD30/31/41, KAD42, KAD43, KAD44, KAD300, TAMD30/31/41/42, TMD30/31/40/41, and related variants. Because these broader fitment lists come from distributor and aftermarket references rather than a direct OEM application bulletin, the safest position is to treat 23557470 as correct only when it matches the exact Volvo Penta parts diagram for the engine and turbo assembly being serviced.

Serial Number Fitment Notice

Fitment can vary by engine family, turbo arrangement, exhaust configuration, and serial-number range. Confirm Volvo Penta part number 23557470 against your engine serial number and the correct turbo or air-filter installation diagram before ordering.

When This Part Needs Replacement

Replace this gasket any time the original seal is removed during turbo, exhaust elbow, or adjacent air-filter installation service, or when there are signs of leakage, heat damage, compression set, or deterioration. On turbo-side work, replacing the gasket during reassembly is usually the safer choice than reusing an old seal.

Installation Notes

Install on clean, flat mating surfaces with all old gasket material removed. Confirm the gasket matches the exact diagram location before assembly, and tighten related fasteners evenly to help prevent distortion or repeat leaks. When working around turbo and exhaust-side components, inspect nearby hardware and sealing faces at the same time.

Alternate/Superseded Part Numbers

Related cross-reference sources currently associate Volvo Penta 23557470 with reference numbers 3582676, 859111, and 3581570. These should be treated as related replacement references, with 23557470 used as the primary ordering number for this listing.

Parts Desk Insight

With turbo-side gaskets, the old seal can look usable on the bench and still leak after reassembly. Matching the exact turbo diagram and replacing the gasket while the joint is already open usually saves a lot of repeat labor.

Shipping: Ships same or next day for fast Canada wide shipping.