Volvo Penta Gasket 3582725

Volvo Penta 3582725 is a genuine OEM gasket used in Volvo Penta D4 and D6 diesel inlet and exhaust system service. Current parts-diagram references place this gasket in the D6-280A-A inlet and exhaust system, and broader current fitment sources consistently identify it as an exhaust manifold gasket for D4 and D6 applications.

Key Features

• Genuine Volvo Penta OEM gasket, part number 3582725.
• Listed in Volvo Penta inlet and exhaust system diagram references.
• Commonly described in current cross-reference sources as an exhaust manifold gasket.
• Current aftermarket fitment references note typical quantity as 1 required on many D4 applications and 2 required on many D6 applications.

Engine Compatibility

Current references support Volvo Penta 3582725 across D4 and D6 diesel families. Stronger fitment trails show D6-280A-A in the OEM-style diagram reference, while broader current compatibility sources associate this gasket with D4 models such as D4-150A-G, D4-175I-G, D4-180I-B through F, D4-210A, D4-225A/I variants, D4-230A-G, D4-260A/D variants, and with D6 models including D6-280A and related D6 exhaust-manifold applications. Because fitment can vary by engine version and manifold setup, the safest standard is the exact parts diagram for the engine being serviced.

Serial Number Fitment Notice

Fitment can vary by engine rating, production revision, and serial-number range. Confirm Volvo Penta part number 3582725 against the correct engine serial number and exhaust system diagram before ordering, especially when working on D4 or D6 manifold service.

When This Part Needs Replacement

Replace this gasket any time the exhaust manifold joint has been opened, or when the old gasket shows soot tracking, exhaust leakage, crushing, cracking, or heat-related deterioration. On manifold service, replacing the gasket during reassembly is usually the safer move than reusing the old seal.

Installation Notes

Install on clean, flat mating surfaces with all old gasket material removed. Confirm the gasket matches the exact manifold position in the parts diagram before assembly, and tighten related hardware evenly to help prevent repeat exhaust leaks. For many current D4 applications one gasket is used, while many D6 setups use two, so checking the exact engine diagram before ordering is a smart cross-check.

Alternate/Superseded Part Numbers

Use Volvo Penta 3582725 as the primary ordering number. Current references reviewed consistently point to this exact OEM number for the gasket application above.

Parts Desk Insight

Exhaust manifold gaskets can look usable after teardown and still leak once heat cycles start again. Matching the exact D4 or D6 diagram first usually saves more time than trying to compare the old gasket by shape alone.

Shipping: Ships same or next day for fast Canada wide shipping.