Volvo Penta Gasket 3862105

Volvo Penta 3862105 is a genuine OEM gasket used as a cover seal in Volvo Penta sterndrive upper gear unit service. The strongest current reference trail identifies it specifically as a cover seal and places it within upper gear unit gasket and seal kits for Volvo Penta XDP, X, XHP, and XXP-series drive applications, making it the correct sealing part where 3862105 is called out in the proper drive breakdown.

Key Features

• Genuine Volvo Penta OEM gasket, part number 3862105.
• Current parts references identify it as a cover seal.
• Included in Volvo Penta upper gear unit kit 3859050 for XDP-B drive service.
• Also listed as an individual component in upper gear unit gasket kit 23024 / REC23024 references.
• One current distributor listing shows an approximate weight of 0.015 kg.

Engine Compatibility

Current fitment references support Volvo Penta 3862105 in upper gear unit applications for Volvo Penta XDP, XDP-B, X-B, X-BLT, XHP-BLT, XXP-A, XXP-ALT, and XXP-D3 drive families. The strongest supportable fitment is as the upper gear unit cover seal where part number 3862105 is shown in the correct Volvo Penta drive diagram or repair kit for the specific sterndrive being serviced.

Serial Number Fitment Notice

Fitment can vary by drive family, upper gear housing revision, and serial-number range. Confirm Volvo Penta part number 3862105 against the exact drive serial number and the correct upper gear unit breakdown before ordering, especially on XDP, X, XHP, and XXP applications that may have had previous upper-unit service.

When This Part Needs Replacement

Replace this gasket whenever the upper gear unit cover area has been opened, or when the original seal shows gear-oil seepage, flattening, tearing, hardening, or damage during disassembly. Since current references show it included in upper gear unit service kits, replacing it during adjacent seal work is usually the safer move than reusing the old seal.

Installation Notes

Install on clean, dry, undamaged mating surfaces with all old gasket material removed. Confirm the gasket matches the exact cover position in the upper gear unit diagram before assembly, and tighten related hardware evenly to help prevent repeat leaks. Matching this gasket alongside related kit components such as sealing ring 853868 and seal 3852272 can be a useful cross-check during drive service.

Alternate/Superseded Part Numbers

Use Volvo Penta 3862105 as the primary ordering number. Current reference trails consistently show this exact number as the active cover seal identifier, and it also appears as an individual component within Volvo Penta / aftermarket upper gear unit kit references including 3859050 and 23024 / REC23024.

Parts Desk Insight

With upper gear unit service, small cover seals like this are easy to overlook because they are inexpensive and often come out with the cover. Replacing it while the upper unit is already apart is usually much cheaper than reopening the drive for a small oil leak later.

Shipping: Ships same or next day for fast Canada wide shipping.