Volvo Penta Line Cutter 23062729

Volvo Penta 23062729 is a genuine OEM line cutter used on Volvo Penta IPS propulsion systems to help protect the propeller and shaft area from ropes, fishing line, nets, weeds, and similar debris. Current Volvo-focused product references describe it as a rotating cutter mounted to the rear propeller, designed to cut debris before it can wrap into the propeller area and lead to drag, seal damage, or driveline trouble. Current public parts references also show earlier part number 21686492 updated to 23062729.

Key Features

• Genuine Volvo Penta OEM line cutter, part number 23062729.
• Designed to mount to the rear propeller for rotating cutting action.
• Built to help prevent rope, net, weed, and debris entanglement around the propeller and shaft-seal area.
• Current Volvo-focused reference notes 316 stainless steel construction.
• Current public references show 21686492 replaced by 23062729.

Engine Compatibility

The strongest supportable fitment trail for Volvo Penta 23062729 is with Volvo Penta IPS drive families. Current public references associate it with IPS1, IPS10, IPS15, IPS2, IPS20, IPS3, and IPS30, and other current Volvo-focused seller references summarize fitment more broadly as IPS-A through IPS-F plus IPS10-A applications. Because IPS hardware can vary by drive model and production range, the safest fitment standard is the exact Volvo Penta serial-number-based parts lookup for the propulsion unit being serviced.

Serial Number Fitment Notice

Fitment can vary by IPS model, propeller arrangement, and serial-number range. Confirm Volvo Penta part number 23062729 against your exact IPS drive serial number and the correct Volvo Penta propeller or marine-propulsion diagram before ordering, especially on IPS installations where production updates may change whether the line cutter is standard equipment or an added service part. One current Volvo-focused source notes it was included as standard on IPS1 from serial number 3940018643 and on IPS10 from production start.

When This Part Needs Replacement

Replace this line cutter when the original cutter is bent, damaged, heavily worn, corroded, or missing, or when the IPS propeller area has suffered line-entanglement damage that may have affected the cutter’s edge or mounting condition. It is also a smart replacement when restoring an IPS drive that operates in waters where rope, trap line, weeds, or floating debris are common. This service guidance is based on the part type and its protective driveline function.

Installation Notes

Match this line cutter to the exact Volvo Penta IPS application before installation. Current public references describe it as easy to install using the existing locking-bolt arrangement at the rear propeller, but confirming the exact IPS model and propeller setup first is still the safest cross-check before ordering or fitting. Because current Volvo-focused references also show different cutter diameters by IPS family, matching by exact part number and drive model matters more than comparing cutter size by eye alone.

Alternate/Superseded Part Numbers

Current public references show 21686492 as the earlier number updated to 23062729. Use 23062729 as the current primary Volvo Penta ordering number for this line cutter.

Parts Desk Insight

This is one of those parts that is easy to overlook until a rope-wrap turns into a much bigger IPS repair. Matching the exact Volvo Penta IPS model first is usually much safer than assuming every line cutter in the prop area is the same.

Shipping: Ships same or next day for fast Canada wide shipping.